I made some Live Edge boards that could be used as a Trivett, centre piece, wall plaque, or a cutting board .
Home Index Page   |   Bottom
photo01

The boards are live edge and the text is engraved with a 60 degree "V" bit.
White Ash.

photo02

The wavey lines and the oval are machined with a .1875" or a 3/16" Ball Nose end mill at a depth of .020".
White Ash.

photo03

The wavey lines here are 1" apart, the boards above are ½ apart.
Black Cherry

photo04

.
Black Cherry

photo05

.
Black Cherry

photo06

.
White Ash.

Home Index Page   |   Bottom   |   Top
photo07

The back of the boards has a slot that may be used to hang it on the wall as a plaque.
Black Cherry

photo08

The boards may be coated with Mineral Oil and there are several on the market available at quality paint shops and hardware stores.
Black Cherry

photo09

If you plan on using the boards for food products follow the instructions on the mineral oil container.
White Ash.

photo010

.
White Ash.

photo011

.
White Ash.

photo012

.
Black Cherry

Home Index Page   |   Bottom   |   Top
photo013

.

photo014

.

photo015

.

photo016

.

Home Index Page   |   Top